IndiPRO Tools Dual L-Series Power Adapter for Blackmagic Cinema CameraAdd dual L-Series battery support for your Blackmagic Cinema Camera with this Dual L-Series Power Adapter from IndiPRO Tools. The adapter features a dedicated DC connector for the camera on an integrated cable, and offers an unregulated 14.4V, 2.5mm DC output on the side for simultaneously powering a second device. Both batteries must be used at the same time and will extend camera runtime by up to several hours, depending on the models you use.The adapter has a 1/4"-20 threaded mounting hole on the rear for attachment to cages, rigs, and other supports; and the cable is approximately 20" long, so you can mount the adapter on the back of your rig for counterbalance.While powering the camera (and second device), the adapter also charges the internal camera battery, so when the L-Series batteries are depleted the camera battery will kick in at full capacity. A 4-LED gauge on the front will indicate the approximate runtime remaining.Key FeaturesDual L-Series battery support and simultaneous unregulated 14.4V, 2.5mm DC output for a second deviceDedicated DC connector for the camera on an approximately 20" integrated cable1/4"-20 threaded mounting hole on the rearAlso charges the internal camera battery while powering camera (and second device)4-LED battery level indicator on the frontCan be mounted on the back of your rig for counterbalance